ستار دي في بي | StarDVB
أهلاً وسهلاً بك من جديد في ستار دي في بي StarDVB. تم في الاونة الاخيرة تطوير وتخصيص الموقع ليشمل IPTV و SMART TV بشكل أوسع من السابق. إذا كنت مسجل سابقا يمكنك الدخول باسم المستخدم السابق نفسه، وإن كنت غير مسجل مسبقاً، يمكنك التسجيل الان. نرحب بمشاركاتك واقتراحاتك في أي وقت، نتمنى لك وقتاً ممتعاً معنا.
حصري طريقة التحميل الفضائي بواسطة SkyNet على نظام لينكس
- بادئ الموضوع Shark DVB
- تاريخ البدء
اهلا بيك اخي greatmagician والله اشتقنالك ياغالي واشتقنا لمواضيعك الرائعة وشروحاتك الجميلة
اخي الغالي بالفعل هذا اللي حصل عندي بالضبط ولم اوفق بتعريفه
حتى انني حاولت ان اعرفه على انه كرت twinhan mantis ولم افلح
==================================
اشكرك اخي احمد
وباذن الله سأقوم بالمحاولات وفق تعليماتك
ربي يبارك فيك
====================================
اخي الغالي
سبق وان حاولت مع كرت PCI ولم افلح
لكن حسب الاخوة فان كرت الUSB يتعرف على الvmware لكنني لم اجرب
تحياتي للجميع
تحياتي
تم تجربة هذه النسخة لكن تحتاج بعد التنصيب أت تغير اللغة من الروسية الى الانجليزية وتعمل ريستارت.
النسخة تعمل بشكل جيد جدا. هذا رابط تورنت لتحميل هذه النسخة
https://rapidshare.com/files/3512691741/_rutracker.org_.t2995457.torrent.zip
اخي احمد شوف الي صار
كود:
153637.678 hserv_thread: bind error
153637.678 mpe_request: bind error 98
153638.678 hserv_thread: bind error
153638.678 /dev/dvb/adapter0/frontend0
153638.678 /dev/dvb/adapter0/dvr0
153638.678 /dev/dvb/adapter0/demux0
153638.679 can't open /dev/dvb/adapter0/frontend0
Device or resource busy
nnawwaf@nnawwaf-desktop:~/skynet$تفضل اخي احمد
كود:
[ 1.313042] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
[ 1.313044] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 1.313373] wmi: Mapper loaded
[ 1.316025] [drm] Initialized drm 1.1.0 20060810
[ 1.321930] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.321936] nouveau 0000:01:00.0: setting latency timer to 64
[ 1.323046] [drm] nouveau 0000:01:00.0: Detected an NVc0 generation card (0x0
c3200a1)
[ 1.326943] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PR
AMIN
[ 1.347268] scsi0 : ahci
[ 1.347363] scsi1 : ahci
[ 1.347435] scsi2 : ahci
[ 1.347507] scsi3 : ahci
[ 1.347580] scsi4 : ahci
[ 1.347647] scsi5 : ahci
[ 1.347756] ata1: SATA max UDMA/133 abar m2048@0xf6325000 port 0xf6325100 irq
43
[ 1.347760] ata2: SATA max UDMA/133 abar m2048@0xf6325000 port 0xf6325180 irq
43
[ 1.347763] ata3: SATA max UDMA/133 abar m2048@0xf6325000 port 0xf6325200 irq
43
[ 1.347766] ata4: SATA max UDMA/133 abar m2048@0xf6325000 port 0xf6325280 irq
43
[ 1.347769] ata5: SATA max UDMA/133 abar m2048@0xf6325000 port 0xf6325300 irq
43
[ 1.347773] ata6: SATA max UDMA/133 abar m2048@0xf6325000 port 0xf6325380 irq
43
[ 1.347810] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.347822] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.347979] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
[ 1.389026] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 1.389029] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 1.389031] [drm] nouveau 0000:01:00.0: Bios version 70.06.1f.00
[ 1.389032] [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
[ 1.389034] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 1.389036] [drm] nouveau 0000:01:00.0: Found Display Configuration Block ver
sion 4.0
[ 1.389038] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01800312 00020030
[ 1.389040] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 04000310 00020030
[ 1.389041] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 08011382 00020030
[ 1.389043] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011380 00020030
[ 1.389044] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 02022362 00020010
[ 1.389045] [drm] nouveau 0000:01:00.0: Raw DCB entry 5: 040333b6 0f200010
[ 1.389047] [drm] nouveau 0000:01:00.0: Raw DCB entry 6: 04003372 00020010
[ 1.389049] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[ 1.389051] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag
0x07
[ 1.389053] [drm] nouveau 0000:01:00.0: 1: 0x00010130: type 0x30 idx 1 tag
0x51
[ 1.389054] [drm] nouveau 0000:01:00.0: 2: 0x00002261: type 0x61 idx 2 tag
0x08
[ 1.389056] [drm] nouveau 0000:01:00.0: 3: 0x00220346: type 0x46 idx 3 tag
0x52
[ 1.389059] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset
0x6812
[ 1.418979] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset
0x6F06
[ 1.431849] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset
0x80FA
[ 1.431850] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset
0x8104
[ 1.431901] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset
0x82D9
[ 1.431903] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x
833E
[ 1.451761] [drm] nouveau 0000:01:00.0: 0x833E: Condition still not met after
20ms, skipping following opcodes
[ 1.451776] [drm] nouveau 0000:01:00.0: voltage table 0x40 unknown
[ 1.470400] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[ 1.470402] [drm] nouveau 0000:01:00.0: 0: memory 135MHz core 50MHz shader 10
1MHz timing 2
[ 1.470405] [drm] nouveau 0000:01:00.0: 1: memory 324MHz core 405MHz shader 8
10MHz voltage 10mV timing 1
[ 1.470407] [drm] nouveau 0000:01:00.0: 3: memory 2000MHz core 875MHz shader
1750MHz voltage 20mV timing 0
[ 1.470473] [TTM] Zone kernel: Available graphics memory: 427246 kiB.
[ 1.470474] [TTM] Zone highmem: Available graphics memory: 1865868 kiB.
[ 1.470475] [TTM] Initializing pool allocator.
[ 1.470484] [drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM
[ 1.470488] mtrr: type mismatch for e8000000,8000000 old: write-back new: wri
te-combining
[ 1.474741] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 1.476362] [drm] nouveau 0000:01:00.0: failed to load fuc409c
[ 1.483388] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.483390] [drm] No driver support for vblank timestamp query.
[ 1.566860] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 1.652516] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) e0:69:9
5:c3:39:c3
[ 1.652519] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.652573] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 1.666845] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.666863] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.666883] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.666901] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.666921] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.666939] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.670052] ata1.00: ATAPI: HL-DT-ST DVDRAM GH24NS70, GN00, max UDMA/100
[ 1.672605] ata4.00: ATA-8: SAMSUNG HD105SI, 1AJ10001, max UDMA/133
[ 1.672607] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), A
A
[ 1.674417] ata1.00: configured for UDMA/100
[ 1.678326] ata4.00: configured for UDMA/133
[ 1.682877] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS70 GN00 PQ
: 0 ANSI: 5
[ 1.691347] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 1.691349] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.691426] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.691474] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.691645] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD105SI 1AJ1 PQ
: 0 ANSI: 5
[ 1.691749] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/93
1 GiB)
[ 1.691758] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1.691791] sd 3:0:0:0: [sda] Write Protect is off
[ 1.691796] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.691838] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, does
n't support DPO or FUA
[ 1.699312] hub 1-1:1.0: USB hub found
[ 1.699409] hub 1-1:1.0: 6 ports detected
[ 1.740740] [drm] nouveau 0000:01:00.0: allocated 1360x768 fb: 0x8020000, bo
f238c600
[ 1.740774] fbcon: nouveaufb (fb0) is primary device
[ 1.740815] Console: switching to colour frame buffer device 170x48
[ 1.740841] fb0: nouveaufb frame buffer device
[ 1.740843] drm: registered panic notifier
[ 1.740848] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on min
or 0
[ 1.767267] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3 sda4
[ 1.767619] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.798819] Refined TSC clocksource calibration: 3092.973 MHz.
[ 1.798826] Switching to clocksource tsc
[ 1.810839] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 1.943237] hub 2-1:1.0: USB hub found
[ 1.943346] hub 2-1:1.0: 8 ports detected
[ 2.014834] usb 1-1.2: new high speed USB device number 3 using ehci_hcd
[ 2.112332] Initializing USB Mass Storage driver...
[ 2.112888] scsi8 : usb-storage 1-1.2:1.2
[ 2.112959] usbcore: registered new interface driver usb-storage
[ 2.112961] usbcore: registered new interface driver uas
[ 2.112963] USB Mass Storage support registered.
[ 2.182811] usb 1-1.3: new low speed USB device number 4 using ehci_hcd
[ 2.284263] input: USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1
.3/1-1.3:1.0/input/input2
[ 2.284323] generic-usb 0003:04F3:0217.0001: input,hidraw0: USB HID v1.11 Mou
se [USB Mouse] on usb-0000:00:1a.0-1.3/input0
[ 2.284331] usbcore: registered new interface driver usbhid
[ 2.284332] usbhid: USB HID core driver
[ 2.350925] usb 1-1.4: new low speed USB device number 5 using ehci_hcd
[ 2.455979] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/
1-1/1-1.4/1-1.4:1.0/input/input3
[ 2.456062] generic-usb 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Key
board [USB USB Keykoard] on usb-0000:00:1a.0-1.4/input0
[ 2.519006] EXT3-fs: barriers not enabled
[ 2.531216] kjournald starting. Commit interval 5 seconds
[ 2.531253] EXT3-fs (sda6): mounted filesystem with ordered data mode
[ 3.112026] scsi 8:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ
: 0 ANSI: 2
[ 3.546584] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 3.548494] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 11.704266] udevd[371]: starting version 173
[ 11.728301] mei: module is from the staging directory, the quality is unknown
, you have been warned.
[ 11.728553] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.728559] mei 0000:00:16.0: setting latency timer to 64
[ 11.733460] lp: driver loaded but no devices found
[ 11.796641] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 2
2
[ 11.796688] HDA Intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 11.796714] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.798693] type=1400 audit(1329835100.024:2): apparmor="STATUS" operation="p
rofile_load" name="/sbin/dhclient" pid=536 comm="apparmor_parser"
[ 11.799033] type=1400 audit(1329835100.024:3): apparmor="STATUS" operation="p
rofile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=536 comm="
apparmor_parser"
[ 11.799249] type=1400 audit(1329835100.024:4): apparmor="STATUS" operation="p
rofile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=536 comm="appar
mor_parser"
[ 11.814818] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip l
oaded successfully
[ 11.815003] flexcop-pci: will use the HW PID filter.
[ 11.815005] flexcop-pci: card revision 2
[ 11.815016] b2c2_flexcop_pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -
> IRQ 16
[ 11.829793] DVB: registering new adapter (FlexCop Digital TV device)
[ 11.831683] b2c2-flexcop: reading of MAC address failed.
[ 11.831684]
[ 11.832340] CX24123: detected CX24123
[ 11.837249] CX24113: trying to detect myself
[ 11.837941] CX24113: successfully detected
[ 11.838286] CX24113: version: 3
[ 11.838287] b2c2-flexcop: CX24113 successfully attached
[ 11.839392] b2c2-flexcop: ISL6421 successfully attached
[ 11.839394] b2c2-flexcop: found 'Conexant CX24123/CX24109' .
[ 11.839397] DVB: registering adapter 0 frontend 0 (Conexant CX24123/CX24109).
..
[ 11.839435] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.8'
at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[ 11.851918] hda_codec: ALC892: BIOS auto-probing.
[ 11.858072] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.
0/sound/card0/input4
[ 11.858180] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 1
7
[ 11.858182] hda_intel: Disabling MSI
[ 11.858220] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 12.063267] EXT3-fs (sda6): using internal journal
[ 12.452587] generic-usb 0003:1C4F:0002.0003: usb_submit_urb(ctrl) failed
[ 12.452602] generic-usb 0003:1C4F:0002.0003: timeout initializing reports
[ 12.452696] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/
1-1/1-1.4/1-1.4:1.1/input/input5
[ 12.452816] generic-usb 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Dev
ice [USB USB Keykoard] on usb-0000:00:1a.0-1.4/input1
[ 12.459032] usbcore: registered new interface driver usbserial
[ 12.459043] USB Serial support registered for generic
[ 12.459071] usbcore: registered new interface driver usbserial_generic
[ 12.459073] usbserial: USB Serial Driver core
[ 12.460799] USB Serial support registered for GSM modem (1-port)
[ 12.460853] option 1-1.2:1.0: GSM modem (1-port) converter detected
[ 12.460949] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB0
[ 12.460960] option 1-1.2:1.1: GSM modem (1-port) converter detected
[ 12.461006] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB1
[ 12.461042] usbcore: registered new interface driver option
[ 12.461044] option: v0.7.2:USB Driver for GSM modems
[ 12.676402] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[ 12.708396] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[ 12.740411] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[ 12.772408] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[ 12.788484] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01
.0/0000:01:00.1/sound/card1/input6
[ 12.788553] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01
.0/0000:01:00.1/sound/card1/input7
[ 12.788610] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01
.0/0000:01:00.1/sound/card1/input8
[ 12.788663] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01
.0/0000:01:00.1/sound/card1/input9
[ 12.841016] EXT3-fs: barriers not enabled
[ 12.847082] kjournald starting. Commit interval 5 seconds
[ 12.847182] EXT3-fs (sda7): using internal journal
[ 12.847186] EXT3-fs (sda7): mounted filesystem with ordered data mode
[ 12.969017] ppdev: user-space parallel port driver
[ 12.975749] type=1400 audit(1329835101.200:5): apparmor="STATUS" operation="p
rofile_load" name="/usr/lib/cups/backend/cups-pdf" pid=967 comm="apparmor_parser
"
[ 12.976133] type=1400 audit(1329835101.200:6): apparmor="STATUS" operation="p
rofile_load" name="/usr/sbin/cupsd" pid=967 comm="apparmor_parser"
[ 13.193564] type=1400 audit(1329835101.420:7): apparmor="STATUS" operation="p
rofile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=999 comm=
"apparmor_parser"
[ 13.193946] type=1400 audit(1329835101.420:8): apparmor="STATUS" operation="p
rofile_replace" name="/sbin/dhclient" pid=1000 comm="apparmor_parser"
[ 13.194387] type=1400 audit(1329835101.420:9): apparmor="STATUS" operation="p
rofile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1000 co
mm="apparmor_parser"
[ 13.194631] type=1400 audit(1329835101.420:10): apparmor="STATUS" operation="
profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1000 comm="
apparmor_parser"
[ 13.196404] type=1400 audit(1329835101.424:11): apparmor="STATUS" operation="
profile_load" name="/usr/sbin/tcpdump" pid=1005 comm="apparmor_parser"
[ 13.278721] init: failsafe main process (878) killed by TERM signal
[ 13.280390] init: apport pre-start process (1044) terminated with status 1
[ 13.285973] init: apport post-stop process (1083) terminated with status 1
[ 13.289276] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
[ 13.344338] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
[ 13.344490] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.384841] Bluetooth: Core ver 2.16
[ 13.384859] NET: Registered protocol family 31
[ 13.384861] Bluetooth: HCI device and connection manager initialized
[ 13.384863] Bluetooth: HCI socket layer initialized
[ 13.384864] Bluetooth: L2CAP socket layer initialized
[ 13.384894] Bluetooth: SCO socket layer initialized
[ 13.386213] Bluetooth: RFCOMM TTY layer initialized
[ 13.386218] Bluetooth: RFCOMM socket layer initialized
[ 13.386219] Bluetooth: RFCOMM ver 1.11
[ 13.386582] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.386584] Bluetooth: BNEP filters: protocol multicast
[ 13.610082] Adding 6404092k swap on /dev/mapper/cryptswap1. Priority:-1 exte
nts:1 across:6404092k
[ 48.391326] PPP BSD Compression module registered
[ 48.407663] PPP Deflate Compression module registered