دكتور أهلاوي
ستار جديد
TransEdit 3.5.3.
جديد البرنامج
- Fix: DiSEqC 1.2 support for Digital Devices cards didn't work as expected (now tested and proved as working).
- Added: Unicable EN 50494 support for Digital Devices cards (Cine S2, Satix S2 Dual, tested and proved as working).
Please note: The software shipped with Digital Devices cards may include a Unicable configuration tool for the driver (applies to the Cine S2 card). It enables Unicable reception in a way that is transparent to the DVB application, which means, the application doesn't have to handle it and doesn't have to know that the card is connected to a Unicable Router (Sat SCR). Don't configure the driver and DVBViewer/TransEdit for Unicable. This will cause confusion. Configure the driver or DVBViewer/TransEdit for Unicable, but not both!
- Added: DiSEqC 1.2 support for Anysee DVB-S/S2 devices (untested). In case of a TransEdit update please perform Settings -> Hardware -> Detect Devices.
- Fix: In case of a DVB device with a known vendor, followed by a device with an unknown vendor in the device list, the TransEdit device detection assigend a (wrong) Vendor ID to the latter instead of 0.
- Changed: The TransEdit Scanner now accepts different transportstream IDs in the PAT and SDT, if (and only if) the transportstream ID in the PAT is zero, assuming that it has not been set by the broadcaster. The change enables retrieving channel names from the SDT in this very case, so the channels are not listed as "Service xxxx" anymore.
If the transportstream ID in the PAT and the SDT differ in some other way (e.g. due to corrupted data), the SDT is ignored and no channel names are retrieved.
- Updated: Transponder list for Astra 23° East, Astra 28° East and Hotbird 13° East.
جديد البرنامج
- Fix: DiSEqC 1.2 support for Digital Devices cards didn't work as expected (now tested and proved as working).
- Added: Unicable EN 50494 support for Digital Devices cards (Cine S2, Satix S2 Dual, tested and proved as working).
Please note: The software shipped with Digital Devices cards may include a Unicable configuration tool for the driver (applies to the Cine S2 card). It enables Unicable reception in a way that is transparent to the DVB application, which means, the application doesn't have to handle it and doesn't have to know that the card is connected to a Unicable Router (Sat SCR). Don't configure the driver and DVBViewer/TransEdit for Unicable. This will cause confusion. Configure the driver or DVBViewer/TransEdit for Unicable, but not both!
- Added: DiSEqC 1.2 support for Anysee DVB-S/S2 devices (untested). In case of a TransEdit update please perform Settings -> Hardware -> Detect Devices.
- Fix: In case of a DVB device with a known vendor, followed by a device with an unknown vendor in the device list, the TransEdit device detection assigend a (wrong) Vendor ID to the latter instead of 0.
- Changed: The TransEdit Scanner now accepts different transportstream IDs in the PAT and SDT, if (and only if) the transportstream ID in the PAT is zero, assuming that it has not been set by the broadcaster. The change enables retrieving channel names from the SDT in this very case, so the channels are not listed as "Service xxxx" anymore.
If the transportstream ID in the PAT and the SDT differ in some other way (e.g. due to corrupted data), the SDT is ignored and no channel names are retrieved.
- Updated: Transponder list for Astra 23° East, Astra 28° East and Hotbird 13° East.
يمكنكم متابعة هذا الشرح لمعرفة كيفية الإستخدام
thumb: