DVB Dream : v2.4 is available !
الجديد فى الاصدار
Support for new modulation technologies, MIS with VCM/ACM , PLP and PLS
E-AC3 support (This fixes no audio problem for some channels, tested with DVB-T France streams)
An important HD record problem fixed
New preferences option "Prevent Monitor Power Off (Override Windows power options)"
Added experimental support for MadVR (a 3rd party video renderer claiming higher video quality) (MadVR info/download)
Now possible to stream all channels / whole TS of a tranponder onto local network
Streaming was not working on some channels (when PCR is different than Video) fixed!
One-channel streaming provides all audio pids now
Attempting to run the DD again now brings it to front instead of displaying a warning
Option to collect EPG for other satellites too. (in Options->Preferences->EPG (TV Guide) Only recommended for North American users
Fixed the problem with EPG Cache optimization setting "Within X hours", now default EPG filter option will cache/display EPG events that are "within 5 hours", You can change this behaviour in Options->Preferences->EPG (TV Guide).
Option to start VLC from current record in renderless (in Tools menu, waits for 15 secs to have enough data. This option is meant to be used an alternative to timeshift, make sure you increased max file size in record options)
* Channel list file format changed. DD takes a backup of old CHL and upgrades it to new format itself. New format won't be backward compatible
* E-AC3 has been tested using LAV and MPC audio decoder. (MPC Standalone Filters, LAV Filters)
* You can stream all channels from the same frequency. Just set UDP TS Client IP address to the client PC's address, then check "Active" and "Send all channels". DD might need a restart after this. Now you can start VLC on client PC and VLC's Main menu->Media->Open Network Stream, type this as URL "udp://@:1234", click on "Play". You can switch between channels using Main Menu->Playback->Program. DD will stream channels as decoded as a whole TS. Make sure you disable streaming when you don't use, otherwise it can cause problems while watching TV.
* SIMOSD module has been removed, since it directly accesses to channel list file, it needs update from its author.
* Use EPG cache optimization if you have video problems because of EPG cache / high EPG data rate (especially in North America)
التحميل من الموقع الرسمى
Download DvbDream v2.4
الجديد فى الاصدار
Support for new modulation technologies, MIS with VCM/ACM , PLP and PLS
E-AC3 support (This fixes no audio problem for some channels, tested with DVB-T France streams)
An important HD record problem fixed
New preferences option "Prevent Monitor Power Off (Override Windows power options)"
Added experimental support for MadVR (a 3rd party video renderer claiming higher video quality) (MadVR info/download)
Now possible to stream all channels / whole TS of a tranponder onto local network
Streaming was not working on some channels (when PCR is different than Video) fixed!
One-channel streaming provides all audio pids now
Attempting to run the DD again now brings it to front instead of displaying a warning
Option to collect EPG for other satellites too. (in Options->Preferences->EPG (TV Guide) Only recommended for North American users
Fixed the problem with EPG Cache optimization setting "Within X hours", now default EPG filter option will cache/display EPG events that are "within 5 hours", You can change this behaviour in Options->Preferences->EPG (TV Guide).
Option to start VLC from current record in renderless (in Tools menu, waits for 15 secs to have enough data. This option is meant to be used an alternative to timeshift, make sure you increased max file size in record options)
* Channel list file format changed. DD takes a backup of old CHL and upgrades it to new format itself. New format won't be backward compatible
* E-AC3 has been tested using LAV and MPC audio decoder. (MPC Standalone Filters, LAV Filters)
* You can stream all channels from the same frequency. Just set UDP TS Client IP address to the client PC's address, then check "Active" and "Send all channels". DD might need a restart after this. Now you can start VLC on client PC and VLC's Main menu->Media->Open Network Stream, type this as URL "udp://@:1234", click on "Play". You can switch between channels using Main Menu->Playback->Program. DD will stream channels as decoded as a whole TS. Make sure you disable streaming when you don't use, otherwise it can cause problems while watching TV.
* SIMOSD module has been removed, since it directly accesses to channel list file, it needs update from its author.
* Use EPG cache optimization if you have video problems because of EPG cache / high EPG data rate (especially in North America)
التحميل من الموقع الرسمى
Download DvbDream v2.4
التعديل الأخير:
